JYC IR Remote Shutter for Canon RC-6

JYC IR Remote Shutter for Canon RC-6

Προϊόντα από JYC

Κωδικός Προϊόντος: 41470
Διαθέσιμο
  • 9.00€

    15.00€

This remote is very small and portable. It is highly recommended for everyone who owns one of the cameras listed above. You can now enjoy the remote control capabilities at a frication of the same Nikon IR remote control. Instructions: It can trigger the camera shutter release remotely from a distance. The compatible camera has a built-in infrared receiver for this remote trigger device. It has been proved to be safe and reliable with the multi-brand cameras (see more details in the picture above), and works with all camera remote control modes (Quick-response, Delayed and Bulb). Works from up to 8 meter (25 feet) away.


Optic control using method: 1. Pull out the plastic separator. 2. Mount the camera on a tripod. 3. Press the button and rotate main command dial until (delayed remote) is displayed in the control panel. 4. Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/-30 degree of the lens axis, from the left to the right and from the top to the bosom) and press the shutter-release button on the remote control (when using the remote outdoors, make sure that the subject is not backlit and that the line of site between the transmitter and the infrared receiver is not blocked by the lens or other obstacles). 5. How the camera focuses and shoots depends on the option selected camera's custom setting. For further information, check your camera's manual. 6. Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.

Compatible with: All CANON cameras with IR sensor.

Γράψτε μια κριτική

Παρακαλώ συνδεθείτε ή δημιουργήστε λογαριασμό για να γράψετε κριτική